Horloge connectée avec sondes de T° d'eau et d'air REF : SCONNECT2

This control box integrates the LivePool technology for an intelligent and connected pool (see opposite page).

The LivePool equipments optimise their operation by communicating with each other via the local, private and secure wireless network (Wifi) of the consumer.

FEATURES

• Switch Connect is a modular connected clock controlling filtration, lighting and a booster or an auxiliary pump (boostring for instance).
• Fitted in a standard control boxes in place of modular pinwheel clocks (on a DIN rail).
• Automatic pairing of the swimming pool's other LivePool devices.
• No electrical coupling required between the LivePool devices.
• Local or remote connectivity.
• Secure access to the application.
• Dimensions: width 7.2 cm (4 modules), height 9 cm, depth 6.5 cm..

FILTRATION

• Filter pump contactor winding controlled by dry contact.
• 3 filtration modes: manual, timer, and automatic according to water temperature.
• SCONNECT2 supplied with water and air temperature sensors.
• Digital temperature sensors with stainless steel head and 5-metre cable.
• Pipe saddle for water sensor not supplied. Wall mounting system for air sensor supplied.
• Integrated frost protection function (sensor supplied).
• Maintenance mode activated directly on the box to manually control filtration and inhibit the application (to backwash the filter or for use withtout the mobile app).
• Diode on the front panel of the box indicating the pump's operating state.

LIGHTING

• Control of the primary of the lighting transformer by dry contact.
• Management of while and RGB LED bulbs.
• Manual or programmable mode according to 3 time ranges.
• Auto power off mode configurable from the LivePool application.
• Sequential colour changes configurable in the LivePool application for RGB leds.
• Diode on the front panel of the box indicating the lighting's operating state.

BOOSTER OR AUXILIARY PUMP

• Control of the contactor coil of the booster or auxiliary pump by dry contact.
• 2 operating modes: manual and clock.
• 3 operating ranges in clock mode.
• Option to have the output slaved to the filtration pump (for use with a booster) or not (for use with an auxiliary pump for instance).
• Diode on the front panel of the box indicating the booster's or auxiliary pump's operating state.