Alveolar Extrasun 400-micron bubble cover

• 400-micron polyethylene film reinforced with a UV-stabilized HDPE woven sheet.
• Antioxidant treatment to prevent polyethylene degradation caused by chlorine.
• Unmatched resistance to tension and tearing.
• Fully opaque material that limits algae growth, saves treatment products, and reduces energy consumption by more than 50%.
• Reinforcement at the corners for covers larger than 6.00 x 13.00 m.
• Rigidity facilitates rolling and unrolling.
• Weight: 550 g/m² (+/- 10%).

• The Extrasun Cellular Cover will be available during the 2025 season. Therefore, before this transition, the cover may be manufactured using Geobubble technology.

INFO

• A cover Extrasun larger than 4.50 x 14.00 m is delivered rolled and requires freight transport.
• The Extrasun cover is manufactured in a straight shape; it is not possible to make rounded shapes due to the rigidity of the material.

• Make sure to install the cover with the bubble side facing the water.


• Use a roller to facilitate handling.


• Always cover the cover with an opaque protective tarp (when stored on a roller) to protect it from UV rays.


• Remove the cover during shock treatments and wait for the disinfectant level to decrease before repositioning it.


• Do not swim under the cover and do not jump on the cover.


• Limit the operation of automatic disinfection devices in case of absence.